Caution 1:
The appearance of the gears in the image shown at the top is for visual reference only and does not necessarily correspond to the actual appearance of this gear. Please refer to the drawings shown here for the appearance and dimensions of this gear.
The appearance of the gears in the image shown at the top is for visual reference only and does not necessarily correspond to the actual appearance of this gear. Please refer to the drawings shown here for the appearance and dimensions of this gear.
Caution 2:
Allowable bending strength and surface durability in the table on right are a calculated reference value according to the assumed usage conditions. Please see our catalogue for more details or use the strength calculation software by clicking the button above.
Allowable bending strength and surface durability in the table on right are a calculated reference value according to the assumed usage conditions. Please see our catalogue for more details or use the strength calculation software by clicking the button above.
MATING WORM - Option 1
MATING WORM - Option 2
| Catalog Number | Bore Diameter (mm) | Mounting Distance (mm) | |||
|---|---|---|---|---|---|
| Material | Allowable Torque (Nm) | Reference section of gear | |||
| Module | Precision Grade | Backlash Adjustment | |||
| Reduction Ratio | Pressure Angle | Hand of Thread | |||
| Number of Teeth | Tooth Finish | Helix Angle | |||
| Pitch Diameter (mm) | Heat Treatment | Weight kg |
| Catalog Number | Material | Module | Reduction Ratio | Pitch Diameter (mm) | Bore Diameter (mm) | Mounting Distance (mm) |
|---|
