Caution 1:
The appearance of the gears in the image shown at the top is for visual reference only and does not necessarily correspond to the actual appearance of this gear. Please refer to the drawings shown here for the appearance and dimensions of this gear.
The appearance of the gears in the image shown at the top is for visual reference only and does not necessarily correspond to the actual appearance of this gear. Please refer to the drawings shown here for the appearance and dimensions of this gear.
Caution 2:
Allowable bending strength and surface durability in the table on right are a calculated reference value according to the assumed usage conditions. Please see our catalogue for more details or use the strength calculation software by clicking the button above.
Allowable bending strength and surface durability in the table on right are a calculated reference value according to the assumed usage conditions. Please see our catalogue for more details or use the strength calculation software by clicking the button above.
MATING GEAR - Option 1
MATING GEAR - Option 2
MATING GEAR - Option 3
ALSO MATES WITH
| Catalog Number | Pressure Angle | |||
|---|---|---|---|---|
| Material | Tooth Surface Finish | |||
| Module | Heat Treatment | |||
| Speed Ratio | Tooth Hardness | |||
| Number of Teeth | Mounting Distance (mm) | |||
| Pitch Diameter (mm) | Tooth Type | |||
| Bore Diameter (mm) | Direction of Spiral | |||
| Allowable Torque (Nm) | Allowable Torque(Nm) Bending Strength |
Helix Angle | ||
| Allowable Torque(Nm) Surface Durability |
Shaft Angle | |||
| Precision Grade | Weight kg |
| Catalog Number |
Material | Module | Speed Ratio | Bore Diameter (mm) | Tooth Type | Tooth Finish | Direction of Spiral |
|---|
